|
Dimensions: |
||
|
|
Metric |
Imperial |
|
Capacity |
35000 LTR |
9246 US GALLONS |
|
Maximum Gross Weight |
34000 KG |
74956 LBS |
|
Tare |
4300 KG |
9480 LBS |
|
Construction: |
||
|
Working Pressure |
3.0 BAR |
43.5 PSI |
|
Test Pressure |
4.5 BAR |
65.3 PSI |
|
Steam Working Pressure |
6.0 BAR |
43 PSI |
|
Steam Test Pressure |
10.0 BAR |
145 PSI |
|
Relief Valve |
3.3 BAR |
48 PSI |
|
|
||
|
Ambient Temp. Range |
-40°C to +65°C |
-40 F to +149°F |
|
Maximum Cargo Temp |
130°C |
266°F |
|
Shell Material |
Stainless steel, AISI 316 DIN 17441, 1.4401 |
|
|
Thickness |
4.2mm shell, 5mm ends |
|
|
Design Code |
ASME, section VIII, division 1 |
|
|
Approvals Standard Fittings:
|
Bureau Veritas Construction Certificate, DOT UK IMO type 1, UIC, CSC, ADR, RID, TIR, Customs |
|
|
Manlid |
500 MM (20") diameter, located centre. |
|
|
Calibration |
Volumetric stainless steel chart, nominal capacity 31000 litres. |
|
|
Airline |
40 MM (1½") Natco ball valve, outlet 1½" BSP, s/s screw cap. |
|
|
Relief Valve |
80 MM (2½") FV maxi high flow flanged, operating pressure 3.3 bar. |
|
|
Top Valve |
Provision for 3" clamped butterfly valve and 3" full length syphon tube |
|
|
Bottom Discharge |
80 MM (3") FV high-lift foot valve, bolted to steam heated tank pad. External valve, clamped 80mm (3") FV butterfly valve. Outlet 3" BSP screw thread and cap. |
|
|
Gaskets & Seals |
Parts in contact with cargo, PTFE/Teflon. |
|
|
Insulation |
50 MM poly-isocyanurate, except round steam coils - 50 MM glasswool compressed to 25mm, overlaid with 25mm tanklite. 1.5mm maroon painted grp. |
|
|
Steam Heating |
11m² effective surface area, external steam ducts, comprising 8 runs, ¾" BSP inlet/outlet and cap. |
|
|
Compartment |
Spill boxes to top fittings fitted with hinged lids. |
|
|
Temperature Gauge |
Analogue gauge fitted rear end: -20°C to +200°C |
|
|
Frame |
Swapbody 7150 MM length fitted with straddle lift 4876 MM centres on base, top frame at ISO castings, base frame 4 bottom corner castings centred on tank and 4 castings at ISO positioned from the front end of the tank. End protection and side protection top & bottom. |
|
|
Walkway |
475 MM wide Q grating non-slip aluminium. |
|
|
Handrail |
Stainless steel collapsible handrail fitted to outer side of walkway |
|
|
Document Holder |
Fitted rear end. |
|
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.