|
Dimensions: |
||
|
|
Metric |
Imperial |
|
Capacity |
31000 LTR |
8189 US GALLONS |
|
Maximum Gross Weight |
36000 KG |
79366 LBS |
|
Tare |
4300 KG |
9480 LBS |
|
Construction: |
||
|
Working Pressure |
3.0 BAR |
43 PSI |
|
ADR Calculated Pressure |
6.0 BAR |
87 PSI |
|
Test Pressure |
4.5 BAR |
65 PSI |
|
Steam Working Pressure |
6.0 BAR |
87 PSI |
|
Steam test Pressure |
10.0 BAR |
145 PSI |
|
Relief Valve |
3.75 BAR |
47 PSI |
|
|
||
|
Ambient Temp. Range |
-40°C to +65°C |
-40° F to +149°F |
|
Maximum Cargo Temp |
130°C |
266°F |
|
Shell Material |
Stainless steel, AISI 316L DIN 14401, 1.4401 0.03% |
|
|
Thickness |
4.2MM shell, 5.10MM ends |
|
|
Design Code |
ASME, section VIII, division 1 |
|
|
Approvals Standard fittings: |
Bureau Veritas Construction Certificate, IMDG IMO type 1, UIC, CSC, ADR, RID, TIR |
|
|
Manlid |
500MM (20") diameter, 6 point, located towards rear. |
|
|
Calibration |
Volumetric stainless steel chart, nominal capacity 31000 litres. |
|
|
Airline |
40MM (1½") FV ball valve, outlet 1½" BSP, s/s screw cap, located rear. |
|
|
Relief Valve |
80MM (3") (two) FV maxi high flow flanged, operating pressure 3.75 bar. Provision for rupture disc. |
|
|
Cleaning Port |
DN300 (12") 4 point FV, located to front. |
|
|
Top Discharge |
Provision for 80mm (3") butterfly valve, rear compartment. |
|
|
Bottom Discharge |
80MM (3") FV 30 high lift foot valve and clamped 80mm (3") FV butterfly valve, Outlet 3" BSP screw thread and cap. |
|
|
Gaskets & Seals |
Parts in contact with cargo, PTFE/Teflon. |
|
|
Insulation |
50MM (2") isocyanurate (CFC free) rigid foam to shell, glasswool 16kg/m² to ends, white 2MM aluminium cladding; thermal value 37 Kcal/hr. |
|
|
Steam Heating |
8.5m² effective surface area, eight runs external steam ducts. |
|
|
Compartment |
Spill boxes to top fittings, hinged lids lay flat. |
|
|
Temperature Gauge |
Analogue gauge fitted rear end: -20°C to 150°C. |
|
|
Frame |
Swapbody 7150mm length fitted with straddle lift 4876MM centres on base, top frame at ISO castings, base frame 4 bottom corner castings centred on tank. and 4 castings at ISO positioned from the front end of the tank. End protection and side protection. Empty side lifts provision. |
|
|
Walkway |
400MM wide Q grating non-slip aluminium. One longitudinal, transverse section at rear end. Collapsible handrail fitted on right hand side. |
|
|
Document Holder |
Fitted rear end. |
|
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.