Products and Specifications
Tanks for Foodstuffs
T11 A26 tank 26000 litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 26000 LTR | 6869 US GALLONS |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3830 KG | 8444 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 266°F |
| Shell Material | Stainless steel, ASTM A240 316 / 316L low carbon <0.03% DIN 17441 w1.4401. Cold rolled shell 2B finish | |
| Thickness | Nominal 4.2 MM shell +0.1 corrosion allowance, 4.65 ends, equivalent 6mm mild steel in accordance with regulations. | |
| Design Code / Approvals | ASME, section VIII, division 1 where applicable and IMDG T11, US Dot CFR 49 T11, ADR, RID, UIC, CTC, AAR, CSC, TIR. ISO | |
| Standard Fittings: | ||
| Manlid | 500 MM (20") diameter, 8 point fixing, 14 x 12 MM seal. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline / Vapour | 40 MM (1½") ball valve Fort Vale. Outlet 1½ " BSP, stainless steel screw cap. | |
| Relief Valve | 80 MM(3") DIN65 flanged Fort Vale Mk111 super maxi highflow, operating pressure 4.4 bar, weld-in flange plugged provision for second flanged valve. | |
| Top Outlet | Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80 MM (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full length syphon tube. | |
| Bottom Discharge | 80 MM(3ft) Fort Vale Highlift foot valve and FV clamped 80mm (3ft) butterfly valve. Outlet 3ft BSP screw thread and cap. | |
| Remote Closure | Bottom valve closure device fitted together with provision of fusible link. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Steam Heating | 7.5m² (80ft²) effective surface area, eight external steam ducts ¾" BSP screw inlet / outlet and cap. Maximum pressure 4 bar. Tank max temperature 130°C | |
| Insulation | 50 MM (2ft) total comprising 50mm mineral wool 55 kg/m3 (CFC free) semi rigid stiffened at top and covered by 0.8mm grade 5251 H44 aluminium pre-painted cladding, estimated thermal value 37 Kcal/Hr. | |
| Compartment | Open stainless steel spill compartments with provision for optional lids. | |
| Document Holder / Earth | Fitted rear end, suitable for shipping papers, MSDS etc. Earth located at rear . | |
| Data Plate / Markings | Stainless steel data plate detailing specifications fitted rear end. | |
| Walkway | Aluminium Q grating with access to top fittings, extending to front end. Provision for optional handrail. Ladder at rear rhs. | |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.