Products and Specifications
Tanks for Chemicals
T11 A26 26000 Litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 26000 LTR | 6869 US GALLONS |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3830 KG | 8444 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve Set Pressure | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 248°F |
| Shell Material | Stainless steel, ASTM A240 316 low carbon <0.03% DIN 17441 w1.4401. Cold rolled shell 2B finish. | |
| Thickness | Nominal 4.4mm shell +0.12 corrosion allowance, 5.3mm ends, equivalent 6.00mm mild steel in accordance with regulations. | |
| Design Code/Approvals | ASME, section VIII, division 1 where applicable and IMDG T11, US Dot CFR 49 T11, ADR, RID, UIC, CTC, AAR, CSC, TIR. ISO | |
| Standard Fittings: | ||
| Manlid | 500 MM (20") diameter, 8 point fixing, 14x 12 MM seal. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline / Vapour | 40 MM (1½") ball valve Fort Vale, outlet 1½ " BSP, stainless steel screw cap fitted centre compartment. | |
| Relief Valve | 80 MM (3") DN80, 4 holes M16 145 pcd flanged Fort Vale Mk111 super maxi high flow, operating pressure 4.4 bar, weld-in flange blanked 4 holes M16 @145pcd. | |
| Top Outlet | Blanked weld-in low profile flange 6 M12 holes @ 168.3 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. | |
| Bottom Discharge | 80 MM (3") Fort Vale Univalve foot valve and 80mm (3") butterfly valve. Outlet 3" BSP screw thread and cap. | |
| Remote Closure/fusible device | Bottom valve closure device fitted together with provision of fusible link to meet CFR49. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Steam Heating | 8.4m² (110'²) effective surface area , eight external longitudinal and 3 circumferential steam ducts ¾" BSP screw inlet / outlet and cap. Maximum pressure 4 bar. Tank max temperature 130C° | |
| Insulation | 50 MM (2") total comprising 50 MM polyurethane covered by white glass reinforced fibre, stainless steel bands at joints, estimated thermal value 40 Kcal/Hr. | |
| Compartment | Stainless steel spill compartments, centre compartment fitted with lid. Rear compartment contains top valve provision; centre compartment contains relief valve, airline and manway. | |
| Document Holder / Earth | Fitted rear end, suitable for shipping papers, MSDS etc. Earth located at rear. | |
| Data Plate / Markings | Stainless steel data plate detailing specifications fitted rear end. | |
| Walkway | Aluminium Q grating, extending to front end. Provision for optional handrail. Ladder at rear rhs. |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.