Products and Specifications
Tanks for Specialised Chemicals and Corrosives
T14 A24 24000 litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 24000 LTR | 6340 US GALLON |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3600 KG | 7936 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C TO +65°C | -40°F TO +149°F |
| Maximum Cargo Temp. | 110°C | 230°F |
| Shell Material | Stainless steel, AISI 316 DIN 17441 1.4436 | |
| Thickness | 4.8MM shell, 5.05MM ends, equivalent 6.35mm mild steel | |
| Design Code | ASME, section VIII, division 1 | |
| Approvals | Lloyd's Register Construction Certificate, DOT UK IMO type 1, DOT US IM101, UIC, CTC, AAR, FRA, CSC, ISO, ADR, RID, BAM |
|
| Standard Fitting: | ||
| Manlid | 500MM (20") diameter. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline | 40 MM (1½") FV blacko ball valve, outlet 1½ " BSP, s/s screw cap. | |
| Relief Valves | 63mm (2½") BSP, operating pressure 4.4 bar. | |
| Top Outlet | 80 MM (3") FV butterfly valve, 80 MM (3") removable full length syphon tube, Outlet 3" BSTD, DIN 80, ASA 150 bolted blank flange. | |
| Bottom Discharge | Provision for 80mm (3") FV highlift foot valve and clamped 80mm (3") FV butterfly valve, outlet 3" BSP screw thread and cap. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Steam Heating | 7.5m² (80'²) effective surface area external steam ducts ¾" BSP screw inlet/outlet and cap | |
| Insulation | 50mm (2") mineral wool (CFC free) segments, grp cladding, thermal value 47 Kcal/hr at 30°C. | |
| Frame | Beam frame with bolted side rails top and bottom. | |
| Walkway | Aluminium Q grating with access to top fittings, extending to manlid. | |
| Compartment | Top fittings protected in open stainless steel spillage box. | |
| Document Holder | Fitted rear end. | |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.