Products and Specifications
Tanks for Foodstuffs
T11 U24 uninsulated tank 24000 litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 24000 LTR | 6340 US GALLONS |
| Maximum Gross Weight | 34000 KG | 74956LBS |
| Tare | 3755 KG | 8278 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 266°F |
| Shell Material | Stainless steel, AISI 316 DIN 17441 1.4401 | |
| Thickness | 4.6 MM shell, 5.85 MM ends, equivalent 6.35 MM mild steel | |
| Design Code | ASME, section VIII, division 1 | |
| Approvals | Bureau Veritas Construction Certificate, DOT UK IMO type 1,DOT US IM101, UIC, CTC, AAR, FRA, CSC, ISO, ADR, RID | |
| Standard Fittings: | ||
| Manlid | 500 MM (20") diameter. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline | 40 MM (1½") ball valve, outlet 1½ " BSP, s/s screw cap. | |
| Relief Valve | 63 MM (2½") BSP, operating pressure 4.4 bar. | |
| Top Outlet | Blanked flange for optional fitting of 80mm (3") s/s butterfly valve, 80mm (3") removable full length syphon tube. Outlet 3" BSTD, DIN80, ASA 150 bolted blank flange. | |
| Vapour Return | 80 MM (3") bolted flange for optional fitting of vapour return. | |
| Bottom Discharge | 80 MM (3") clean flow foot valve and clamped 80mm (3") butterfly valve. Outlet 3" BSP screw thread and cap. | |
| Remote Closure | Bottom valve closure device fitted. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Steam Heating | 7.5m² (80²) effective surface area external steam ducts, ¾" BSP screw inlet/outlet and cap. | |
| Compartment | Top fittings protected in open stainless steel spillage box. | |
| Document Holder | Fitted rear end. | |
| Walkway | Aluminium Q grating with access to top fittings extending to manlid. | |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.