Products and Specifications
Tanks for Chemicals
T11 E24 Electric Heated 24000 Litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 24000 LTR | 6340 US GALLONS |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3850 KG | 8488 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 248°F |
| Shell Material | Stainless steel, AISI 316(L) DIN 14404 | |
| Thickness | 4.4 MM shell, 4.7mm ends, equivalent 6.35mm mild steel | |
| Design Code | ASME, section VIII, division 1 | |
| Approvals | Bureau Veritas Construction Certificate, DOT UK IMO type 1, DOT US IM101, UIC, CTC, AAR, FRA, CSC, ISO, ADR, RID, IIR, BAM | |
| Standard Fittings: | ||
| Manlid | 500 MM (20") diameter. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline | 40 MM (1½") blacko ball valve, outlet 1½" BS s/s screw cap, located in rear compartment. | |
| Relief Valve | 63 MM (2½") BSP, operating pressure 4.4 bar. | |
| Top Outlet | Blanked flange for optional fitting of 80mm (3") s/s butterfly valve, 80mm (3") removable syphon tube. Outlet 3" BSTD, DIN 80, ASA 150 bolted blank flange. | |
| Bottom Discharge | 80 MM (3") cleanflow foot valve and clamped 80mm (3") butterfly valve, Outlet 3" BSP screw thread and cap. | |
| Remote Closure | Bottom valve closure device fitted. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Insulation | 50 MM (2") isocyanurate (CFC free) rigid foam; white 2mm grp cladding; thermal value 37 Kcal/hr at 30°C. | |
| Steam Heating | 7.5m² (80ft) effective surface area, external steam ducts, ¾" BSP screw inlet/outlet and cap. | |
| Electric Heating | Mannings thermal harness to external surface; effective area 12m² (130²). 11.5 KW Single voltage 440 3-phase AC. 20ft cable CEE17 plug. | |
| Temperature Gauge | 0-130°C fitted rear end. | |
| Compartment | Top fittings protected in open stainless steel spillage box. |
| Document Holder | Fitted rear end. |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.