Products and Specifications
Tanks for Foodstuffs
T11 A21 21000 litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 21000 LTR | 5548 US GALLONS |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3785 KG | 8344 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 266°F |
| Shell Material | Stainless steel, ASTMA240 316L DIN 17441 W1.4436 | |
| Thickness | 4.8 MM shell, 5.05 MM ends, equivalent 6.35 MM mild steel | |
| Design Code | ASME, section VIII, division 1 | |
| Approvals | Bureau Veritas Construction Certificate, DOT UK IMO type 1, DOT US IM101, CSC, ADR, RID, UIC, IIR, CT, AAR, FRA | |
| Standard Fitting: | ||
| Manlid | 500 MM (20") diameter., 6 point swing bolt fastening | |
| Calibration | Volumetric stainless steel chart. | |
| Airline | 40 MM (1½") modentic ball valve, outlet 1½" BSP, s/s screw cap. | |
| Relief Valve | 63 MM (2½") BSP, operating pressure 4.4 bar. | |
| Top Outlet (optional) | Blanked flange for optional fitting of 80 MM (3") s/s butterfly valve, 80 MM (3") removable full length syphon tube, Outlet 3" BSTD, DN80, ASA 150 bolted blank flange. | |
| Bottom Discharge | 80 MM (3") highlift foot valve and clamped 80mm (3") butterfly valve. Outlet 3" BSP screw thread and cap. | |
| Remote Closure | Bottom valve closure device fitted. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Steam Heating | 8 m² (86ft²) effective surface area external steam ducts ¾" BSP screw inlet/outlet and cap. | |
| Insulation | 48 MM (2") isocyanurate (CFC free) rigid foam; 0.8mm aluminium cladding Thermal value 37 Kcal/Hr at 30°C. | |
| Compartment | Top fittings protected in open stainless steel spillage box. | |
| Document Holder | Fitted rear end. | |
| Walkway | Aluminium Q grating with access to top fittings, extending to manlid. | |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.