Products and Specifications
Tanks for Chemicals
21000 Litre T11 A21
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 21000 LTR | 5548 US GALLON |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3600 KG | 7936 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| 6.0 BAR | 87 PSI | |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Temperature: | ||
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 248°F |
| Shell Material | Stainless steel, AISI 316(L) DIN 14404 | |
| Thickness | 4.6mm shell, 4.7mm ends | |
| Design Code | ASME, section VIII, division 1 | |
| Approvals | Bureau Veritas Construction Certificate, DOT UK IMO type 1, DOT US IM101, UIC, CTC, AAR, FRA, CSC, ISO, ADR, RID, BAM | |
| Standard fittings: | ||
| Manlid | 500mm (20") diameter. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline | 40mm (1½") black ball valve, outlet 1½" BSP, s/s screw cap, located in rear compartment. | |
| Relief Valve | 63mm (2½") BSP, operating pressure 4.4 bar. | |
| Top Outlet | Provision for 80mm (3") s/s butterfly valve, 80mm (3") removable full length syphon tube. Outlet 3" BSTD, DIN 80, ASA 150 bolted blank flange. | |
| Bottom Discharge | 80mm (3") clean flow foot valve and clamped 80mm (3") butterfly valve. Outlet 3" BSP screw thread and cap. | |
| Vapour Return | 80mm (3") bolted flange for optional fitting of vapour return. | |
| Remote Closure | Bottom valve closure device fitted. | |
| Gaskets & seals | Parts in contact with cargo, PTFE/Teflon. | |
| Insulation | 50mm (2") isocyanurate (CFC free) rigid foam; white 2mm grp cladding; thermal value 37 Kcal/hr at 30 C. | |
| Steam Heating | 7.5m² (80ft) effective surface area, external steam ducts ¾" BSP screw inlet/outlet and cap. | |
| Temperature Gauge | 0-130°C fitted rear end. | |
| Compartment | Top fittings protected in open stainless steel spillage box. | |
| Document Holder | Fitted rear end. | |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.