Products and Specifications
Tanks for Chemicals
T11 E21 Electric Heated 21000 Litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 21000 LTR | 5548 US GALLONS |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3790 KG | 8355 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 248°F |
| Shell Material | Stainless steel, AISI 316 DIN 17441 1.4436 | |
| Thickness | 4.6 MM shell, 5.05 MM ends, equivalent 6.35mm mild steel | |
| Design Code | ASME, section VIII, division 1 | |
| Approvals | Lloyd's Register Construction Certificate, DOT UK IMO type 1, DOT US IM101, UIC, CTC, AAR, FRA, CSC, ISO, ADR, RID, BAM | |
| Standard Fitting: | ||
| Manlid | 500 MM (20") diameter. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline | 40 MM (1½") blacko ball valve, outlet 1½" BSP, s/s screw cap. | |
| Relief Valve | 63 MM (2½") BSP, operating pressure 4.4 bar. | |
| Top Outlet | Blanked flange for optional fitting of 80mm (3") s/s butterfly valve, 80mm (3") removable full length syphon tube. Outlet 3" BSTD, DIN 80, ASA 150 bolted blank flange. | |
| Bottom Discharge | 80 MM(3") clean flow foot valve and 80mm (3") black ball valve. Outlet 3" BSP screw thread and cap. | |
| Remote Closure | Bottom valve closure device fitted. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Insulation | 50 MM (2") isocyanurate (CFC free) rigid foam; white 2mm grp cladding; thermal value 37 Kcal/hr at 30°C. | |
| Electric Heating | Thermal harness to external surface; effective area 12m² (130ft). Dual voltage 240/440V 3 phase AC. 20' cable CEE17 plug. | |
| Steam Heating | 5m² (53ft) effective surface area, external steam ducts ¾" BSP screw inlet/outlet and cap. | |
| Temperature Gauge | 0-130°C fitted rear end. | |
| Compartment | Top fittings protected in open stainless steel spillage box. | |
| Document Holder | Fitted rear end. | |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and GE SeaCo General Trading conditions.