Dimensions:

Metric

Imperial

External Length

6,058mm

20ft

External Width

2,438mm

8ft

External Height

2,591mm

8ft6"

Internal Length

5,456mm

214.80"

Internal Width

2,294mm

90.31"

Internal Height

2,275mm

89.57"

Door Opening Width

2,290mm

90.16"

Door Opening Height

2,291mm

90.20"

Cubic Capacity

28.5m³

1,008ft³

Maximum Gross Weight

30,480kg

67,200lbs

Tare Weight

2,500kg

5,510lbs

Tare Weight including Machinery

2,940kg

6,480lbs

Payload

27,540kg

60,720lbs

Stacking Height

9

Stacking Load

216,000kg (stacking test load per post  97,200kg)

476,200lbs

Racking Test Load

15,240kg

33,600lbs

Construction:   

Top and Bottom Rail Material

Corten Steel

End Frames Material

Corten Steel

Outer Panels

MGSS

Underfloor

MGSS

Inner Side Lining

HGSS SUS 304

Tee Floor Height

40mm

Door Outer Material

MGSS

Lock Rods

4

Goose Neck Tunnel Length

N/A

Goose Neck Tunnel Width

N/A

Goose Neck Tunnel Height

N/A

Fork Lift Pockets

Yes

Side Insulation

Thickness: 60mm Density: 55kg/m³

Floor Insulation

Thickness: 135/76mm Density: 65kg/m³

Roof Insulation

Thickness: 80mm Density: 40kg/m³

Door Insulation 

Thickness: 74mm Density: 55kg/m³

Air Leakage

2m³/hr

Heat Leakage

19kcal/hr/°C

Door Sill

MGSS

Floor Rail

40mm high and 50mm spaced extruded aluminium "T" shape section

Floor Stringer

Extruded aluminum omega shaped profiles will be step-welded to the T-floor (Quantity: 5)

Scuff Liner

Not fitted

Door Holder

A SUS 304 wire with plastic outside is provided on each door

Door Gasket Outer

E.P.D.M. "C"&"O" section double lips

Side Post and Stringers

Outer: 2 per side x 3mm thick hat shape Corten posts sited over the forklift pockets, to be glued or spot-welded to side panel; 3 per side x 1.6mm thick hat shape.  Corten posts spot-welded to side panel

Inner: 0.8mm thick hat shape MGSS stringers spot-welded to side lining

(Quantity: 6 each side)

Roof Bow and Stringer

Outer: 0.8mm MGSS pressed plates spot-welded to roof panel (4 pieces)

Inner: 0.8mm thick Aluminum stringer affixed to the roof lining by glue and rivets

(4 pieces)

Roof Lining

0.8mm thick one piece of pre-painted white aluminum sheet with small corrugations

Paint Corten Steel Parts

1^st primer: Hot spray galvanized: DFT  30 Micron

2^nd primer: Epoxy zinc phosphated: DFT  50 Micron

3^rd top: Acrylic top coat: DFT 70 Micron

Top coat colour: RAL 9010 (White)

Total DFT: 150 Micron

Paint MGSS Parts

1^st primer: Epoxy zinc phosphated: DFT 50 Micron

2^nd top: Acrylic top coat: DFT 70 Micron

Top coat colour: RAL 9010 (White)

Total DFT: 120 Microns

Paint Under Structure

1^st primer: Hot spray galvanized (only for Corten frame): DFT  30 Micron

2^nd primer: Epoxy zinc phosphated: DFT  50 Micron

3^rd top: Tectyl 121B or Dinitrol 4941K: 200 Micron

Total DFT - 250/280 Micron

Top Coat Colour

RAL 9010 (White)

Top and Bottom Lifting Test

2.0 R-T